The STT-1 Origin from Millenia is a collection of the company's essential product line combined into a single box. The STT-1 is a single channel processing chain with various signal path topologies (vacuum tubes, discrete transistors, audio transformer, transformerless) all selectable at the various functions.

The channel strip contains a dual topology microphone preamp, the EQ section of the NSEQ-2, and an opto compressor with 3 paths. A vacuum tube DI input can be routed through a tube or solid state gain path. The unit offers an entirely discrete, Class-A direct signal path from input to output. The signal path can be variously selected to use vacuum tubes or transistors, transformer or non-transformer coupling.

There are at least 134 different product combinations available in the STT-1 Origin - ranging from the most musically transparent, sonically accurate, and dynamically stable audio circuits, to sublime levels of vacuum tube and transformer "euphony", and everything in between. The possibilities afforded the creative engineers, producers and musicians are virtually endless.

 

 

Number of Channels Single
Inputs 1 x XLR Microphone
1 x XLR Line

1 x 1/4" TRS phone Line
1 x 1/4" TS phone DI
Outputs 1 x XLR Direct Out
2 x XLR Main Out (balanced and unbalanced)
1 x 1/4" TS phone Main Out
1 x RCA phono Dynamics Link
Frequency Response Sub 5Hz to beyond 300kHz, +0/-3.0dB
Noise EIN: -131dBu (solid state path, common source, direct out)
Preamp
Gain Range 60dB
Maximum Output +32dBu
Input Impedance Microphone: 6.2kΩ
Line: 2.2kΩ
Instrument: 1MΩ
Phantom Power +48V
Compressor
Threshold Range 40dBu,
Ratio 1.4:1 to 30:1
Attack Time 2 mS to 100 mS, continuously adjustable
Release Time 20 mS to 3.0 S, continuously adjustable
Slope Not specified by manufacturer
Sidechain Dynamics pre/post EQ selection
Equalizer
Filter Type Parametric
Frequency Bands Low-Range Switch: 20, 34, 56, 100, 180 and 270Hz (center peak/shelf selectable)
Low-Mid Sweep: 20 Hz to 220Hz or 200Hz to 2.2 kHz (10x range switch selectable)
High- Mid Sweep: 250 Hz to 2.5kHz or 2.5kHz to 25kHz (10x range switch selectable)
High-Range Switch: 4.8, 5.8, 8.0, 10, 16 and 21kHz (center peak/shelf selectable)
Bandwidth Mid Ranges: Q = 0.4 to 4.0 (sweepable)
Low/High Ranges: Q = 1.0 (fixed)
Range (Boost/Cut) +/-15dB (21 step detent)
Light Indication  
Threshold Range Not applicable
Ratio Not applicable
Attack Time Not applicable
De-Esser
Threshold Range Not specified by manufacturer
Frequency Range Off, 4.9, 6.8, 8.2, 10.7 and 12kHz
Gate
Gate Threshold Not applicable
Gate Rate Not applicable
Physical
Power Requirements 100~120, 200~240 VAC, 50/60Hz (selectable)
Dimensions (WxDxH) 19 x 15.5 x 3.5" (483 x 394 x 89mm)
Weight 25 lbs (11.3kg)
Specialties True analog-level meter provides indication of output level or gain reduction

The Gear Rack

Share this page

Suppliers are ready and waiting! Get speedy processing when you book now.