The M102 Dyna Comp is an in-line compressor pedal from MXR that evens out the signal to your amplifier, and increases sustain with stable dynamics. It can be used with electric guitar, bass or keyboards in applications for live performance, recording, and more.
The M102 Dyna Comp pedal adds smooth sustain to lead lines, and can create the familiar percussive, clicky sound on a clean guitar that's heard on many pop hits. A toggle switch turns the effect on or off bypass, and a red LED indicates when the effect is on. An Output knob controls overall effect volume, and a Sensitivity knob sets the compression ratio.
|Audio Input Jack||1/4" (6.3 mm)|
|Audio Output Jack||1/4" (6.3 mm)|
|Input Impedance||1 MOhms|
|Output Impedance||10 kOhms|
|Nominal Input||-5 dBV|
|Nominal Output Level||-12 dBV|
|Noise Floor||95 dBV A-weighted|
|Total Harmonic Distortion (THD)||0.2% Typ. at -20 dBV, 1 kHz|
|Maximum Compression||36 dB|
|Attack Time||5 ms|
|Release Time||1 sec|
|Current Draw||3.3 mA|
|Power Supply||9 VDC|
The Gear Rack