The Slate Pro Audio Dragon is a single channel FET compressor / limiter with three character settings that change how the unit sounds and responds to the audio material.

The DRAGON starts with a classic FET compressor circuit, reminiscent of vintage units from the 60′s and 70′s. But the SLATE PRO AUDIO engineers enhanced the circuitry of the unit with a mastering grade signal path, including a CLASS A output section based around a custom-made transformer. The result is a compression quality that is rich and warm, but is also capable of sharp and aggressive tones. But this is only the start of what the DRAGON can do.

Add Some Character
The DRAGON includes three character settings that change the way the unit sounds and responds. The first setting is BOOM. This setting adds sub bass harmonics in a unique way that when combined with some compression, can make basses sound massive and kick drums pound like you’ve never heard before. The second setting is BITE, which adds a gentle forward character that makes the source more defined and clear. BITE is superb on bass, snare, vocals, and guitars. Last, is SHEEN. This character setting adds an airy gloss to the source, reminiscent of classic opto tube compressors. This setting is absolutely stunning on vocals, acoustics, and overheads. All character settings can be used simultaneously!

Go Vintage
The DRAGON features a switch called ‘VINTAGE’. This switch enables circuitry which emulates a more vintage sound from a classic age of compression. The result is more harmonics, a bit of ‘grit’, and an overall more aggressive sound that is amazing on electric guitars, bass, and a must-hear on drums.

Saturate
The DRAGON has a three setting saturation selector. This saturation can add subtle harmonics or even gritty distortion to the source. On setting 1, it can add just the right amount of “life” to a dull vocal. On setting 2, it can add presence and warmth to a bass. On setting 3, it can add some rich harmonics to a snare to bring out the sustain. With the character, vintage, and saturate options disabled, the signal path is quiet and clean with just the right amount of rich tone.

Wait, there’s MORE
The DRAGON includes a hi pass filter so you have the option to control the amount of low end that feeds the compressor detection. This is useful when stereo linking two DRAGONS together for transparent mixbuss compression, or for grouped drum compression where you don’t want the drums to ‘pump’.

FET Your Mixbuss
Classic FET compressors have not been common mixbuss choices due to their excessive color and aggressive nature. However, the DRAGON includes a gentle 2:1 setting that sounds amazing on full mixes. With the character, vintage, and saturate options disabled, the signal path is quiet and clean with just the correct amount of rich tone. Of course if you need more color or saturation on your buss, it’s just a button or switch away. With settings 2:1, character SHEEN, Saturate 1, and slow attack and fast release, your mix will come alive in an incredible way.

Squash It
The DRAGON is one of the finest drum compressors to ever hit the analog market, and is complete with the famous overcompression “all buttons in” mode called ‘Squash’. This setting is simply stunning on drum room mics, or any other source that you want to explode out of the mix. Due to its extremely hifi signal path, the DRAGON’s ‘Squash’ setting can create that larger than life effect without causing a harsh or brittle high end.

Mix It Up
Last and certainly not least, the DRAGON includes a ‘Mix’ knob to control the wet/dry ratio of the source. This amazing feature allows you to add some heavy compression, and then back it off gently until it creates the perfect balance for your mix. The ‘Mix’ knob also allows you to parallel compress sources, such as drum busses, without having to mult or buss the drums to additional faders! You’ll find the ‘mix’ knob to be one of the most useful tools in modern analog compression.

Input Impedance 15K Bridged T-control (floating)

Output Load Impedance 15K Transformer balanced (floating)

Frequency Response 20 Hz to 20 kHz ± 1 dB Gain 45 dB, ± 1 dB

Distortion > 0.5% T.H.D. from 50 Hz – 15 kHz With limiting, at 1.1 seconds release setting.

Signal-to-Noise Ratio Output of +22 dBm with no greater than 0.5% T.H.D. > 81 dB with input signal at threshold of limiting, Over a bandwidth of 30 Hz to 18 kHz

Attack Time Adjustable, from 20 to 800 microseconds

Release Time Adjustable, from 50 milliseconds to 1.1 seconds

External Connections

XLR / ¼” TRS (balanced) Stereo Interconnection ¼” Phone

Power Requirements 110V/220V Power Connector Detachable IEC power cable

Fuse 500 mA time delay (slow blow) / 110 V 250 mA time delay (slow blow) / 220 V

Dimensions 19" W x 3.5" H x 8.5" D (two rack spaces)

Weight 12 lbs (with box, 14 lbs)

The Gear Rack

Share this page

Suppliers are ready and waiting! Get speedy processing when you book now.