The Tube-Tech PE 1C is a passive tube-based equalizer inspired by the classic Pultec EQP-1A design.

The Tube-Tech PE 1C is a passive tube-based equalizer, suitable for many different sources ranging from drums, bass and guitars, to vocals. It features a low-frequency section made up of two, low-shelf filters which can be combined to attenuate and boost at the same time. The high-frequency section has a peak and a shelving filter working in parallel, which provides a smooth top end while not getting too bright.

The Tube-Tech PE 1C Program Equalizer contains a low frequency boost and attenuation section (shelving), and a high frequency boost section (peaking). The high frequency section has variable bandwidth as well as attenuation (shelving). The filter section is of the the passive type followed by a tube based push-pull amplifier to restore the gain.

Input and output are balanced as well as fully floating. Input and output transformers come with a static screen between the primary and secondary wirings.

Tube based push-pull amplifier
4 low frequency boosts: 20, 30, 60 and 100 Hz (0 to +14 dB)
4 low frequency attenuations: 20, 30, 60 and 100 Hz (0 to -18 dB)
10 high frequency boosts with variable bandwidth: 1, 1.5, 2, 3, 4, 5, 8, 10, 12 and
16 kHz (0 to +18 dB with sharp bandwidth sharp, 0 to +10 dB with broad bandwidth)
3 high frequency attenuations: 5, 10 and 20 kHz (0 to +18 dB)
Frequency response @ -3 dB: 5 Hz to 40 kHz
Low noise: < -85 dB @ -10 dB gain
No insertion loss
Clickless In/Out switch

The Gear Rack

Share this page

Suppliers are ready and waiting! Get speedy processing when you book now.