The Eventide Orville is a programmable, multichannel, multipurpose, dual digital signal processor (DSP), 24 bit digital audio signal processor with UltraShifter capability.

The variety and depth of the programs that run on the DSPs are truly amazing, from lush reverbs, to choruses, to flanges, to delays, to pitch shifters, to dynamics, to EQs, to filters, to distortions, to synthesizers, to samplers, to ring modulators, and everything in-between.

Most frequency and time-dependent parameters (e.g. delays, LFO's) synchronize to a system tempo for ease of use. And if that’s not enough, DSP A boasts nearly three minutes of sample time in addition to the 40 seconds of delay time found on both DSP A and DSP B! And for the user who is interested in making his or her own programs (if the huge number of factory programs aren’t enough!), Orville continues the “modular programming paradigm” that made the DSP4000 famous.

Sample Rates 96kHz, 88.2kHz, 48kHz, 44.1kHz, or External
Digital Inputs/Outputs 4 AES or 2 AES/2SPDIF at 44.1-96kHz
Analog Input (XLR Balanced) 4 Ch.
Analog Output 4 Ch.
MIDI 5 pin DIN Output and thru, 7 pin DIN input with output capability and external power jack.
Pitch Shifting Up to 8 channels
Compressor/limiter Up to 8 channels
Equalization Up to 128 bands parametric single input, 16 bands at 8 channels
Sampling With time compression, up to 174 seconds mono
Digital Delay up to 87 seconds mono in addition to sampler
Power 100 watts 100-125V, 220-240V, AC 50/60Hz
Size Inches: 3.5h x 19w x 12.5d / Cm: 8.9h x 48.3w x 31.7d
Weight 22 pounds (10Kg) shipping weight

The Gear Rack

Share this page

This piece of gear has limited suppliers. Processing may take longer than usual.