The Fender Vibro-King is an all-tube hand-wired combo amplifier revered by musicians worldwide.

The venerable Fender Vibro-King amp has appeared on countless stages worldwide. This all-tube, completely hand-wired combo amp with birch ply cabinet is covered in black with the appealing "1964 Transitional" Blackface/White knob look. The 60-watt Vibro-King Custom has a pair of powerful 6L6 Groove Tubes for rich, full tone and its sensitivity is unparalleled when it comes to picking dynamics and guitar knob settings. The guitar amp has crystal-clean tones, sparkling reverb, and the commanding overdriven tones are downright inspiring.

Other premium features include '63 Fender Reverb with dwell, mix and tone controls; three 10" Jensen P10R speakers with alnico magnets; 6V6 reverb driver tube; five 12AX7 preamp tubes; heavy-duty textured black vinyl covering with silver grille cloth and nickel hardware; FX loop; and a two-button FAT boost/vibrato footswitch.

Type: CSR 4

Part numbers: 0811000000 (120v, 60Hz)

Power requirement: 195 Watts

Power output: 60 Watts

Impedances input 1: 1 mOhms input 2: 136 kOhms

Impedances output: 2 ohms

Tubes: five 12AX7A (p/n 013341) two GT”6L6 GE (p/n 059778) one 6V6-GTA (p/n 023564)

Fuse type 100v-120v units: 3a, 250v 230v-240v units: 2.5a, 250v

Speaker complement: three 8 ohm, 10" Jensen reissue P10R

Speakers (p/n 055613), total impedance 2.6 ohms

Dimensions height: 25.5"H x 24.75"W 10.5"D

Weight: 72 lb.

The Gear Rack

Share this page

This piece of gear has limited suppliers. Processing may take longer than usual.