The Orange Rockerverb 50 is an all-tube, 50 watt, channel-switching combo, with tube-driven FX loop and reverb. The Rockerverb 50 comes loaded with custom-designed Mercury Magnetics transformers and two 12" Celestion Vintage 30 loudspeakers.
Orange is known for some of the best guitar tones in the industry. With the RV50 you get the perfect amp for almost any situation. It's all here, including that legendary Orange tone, functionality and "bombproof" build-quality. These amps are designed to be pushed beyond traditional restraints into bold new sonic territories.
The Rockerverb 50 is engineered from the ground up to include features never before seen in any Orange amp:
- Chiming tube-driven reverb
- Sparkling tube-driven effects loops
- Ultra-high gain distortion
The Clean Channel: The clean channel's preamp is designed around two stages of all-tube tone and features interactive bass and treble controls. This channel is more than capable of pushing out loud punchy clean tones and yet can still be driven to achieve a light retro crunch.
The Dirty Channel: An Orange amplifier with 4 stages of all-tube overdrive? Yes! The dirty channel goes from crystal clean right through shades of vintage British to full-on overdrive that provides controlled feedback at any volume level. This channel gives you the ability to blow away your friends hi-gain amplifiers, whilst retaining the versatility of an Orange amps retro tones!
Reverb: A newly-designed tube-driven, tube-returned reverb circuit gives the Rockerverb reverb a sparkling chime never heard before from an Orange amp. It features the high-quality Accutronics 3-spring reverb tank.
Effects Loop: Tube-buffered, tube-returned. Orange pioneered the effects loop back in the 1970s. So it's no surprise that the Rockerverb amplifiers come fitted with the highest quality effects loop in the industry.
Tube Failure Protection: Here's a feature to take a weight off your mind! If you experience a power tube failure while playing, Orange's tube failure protection system will kick in and allow you to continue playing at half power. There is even a helpful LED to let you know which pair of tubes has been effected!
Hi/Low Damping: The RV50 features a hi/low damping selector. This controls the amount of current to the power tubes. Switch it to Hi to tighten the sound of the amplifier. Lo gives you a looser sound.
|Power||50 watts RMS / 90 watts Peak||Power Tubes||4 x 6V6|
|Channel Configuration||Clean / Dirty||Reverb Tubes||2 x ECC81 / 12AT7|
|Speaker||2 x 12" Celestion Vintage 30||Mains Fuses||100 / 120V -- T5A
220 / 240V -- T2A
|Reverb||Tube Driven||HT Fuses||F250 mA|
|Footswitch Function||Channel / Reverb||Clean Channel Controls||Volume / Bass / Treble|
|Hi / Lo Damping||Yes||Dirty Channel Controls||Gain / Volume
Bass / Middle / Treble
|Tube Failure Protection||Yes||Other Controls||Reverb|
|Interchangeable Power Tubes||--||Weight||38kg / 84 lbs.|
|Preamp Tubes||4 x EC83 / 12AX7||Dimensions (mm)||660 x 300 x 533|
The Gear Rack