The Dreadbox Erebus is a paraphonic synthesizer which allows for individual control over its two oscillators. The instrument also offers extended connectivity via CV in / out ports.

The DreadBox Erebus offers what is essentially a monophonic synth architecture, but that allows for independent control of its two oscillators. This means you can play (or sequence) two different pitches, but the pitches will go through a shared signal path.

MIDI interface: Midi in/through DIN socket, Pitch note/gate on-off, retrigger function (on-board), Mod wheel (patched on-board), Pitch wheel, MIDI Channel select 1-7 or Omni (DIP switch)
MONO AUDIO IN (1/4″ TS-Unbalanced), accepts up to 3Vpp inputs
MONO AUDIO OUT (1/4″ TS-Unbalanced), sends up to 10Vpp o
Patches: 3.5mm mono
Gate in: activation at 0.9V in a low gain up to 5V for max gain
Gate out: 0-5V
Osc1, Osc2, CV IN: works at 1V/oct and can accept from +/-12V
CV1, CV2 outs: send 1V/oct (converted to analog via midi keyboard)
Mod Wheel out: converts the midi modulation wheel to analog 0-5V out
Envelope out: 0-6.6V depending on the depth setting
LFO out: +/-5V
LFO frequency range: 0.009Hz (110sec) up to 30Hz (0.033sec)
LFO rate CV in: 0-5V
PW in: +/-5V
Echo CV in:0-5V (works best up to 2.5V)
VCA in: 0-5V
Suggested room temperature for best oscillator stability: 18-30 Celcius
Weight: 1.4 kgr
225 x 160 x 75 mm

The Gear Rack

Share this page

This piece of gear has limited suppliers. Processing may take longer than usual.